The right place to buy printer equipment online
The image quality of Epson printers has increased dramatically over the years: from the low quality dot matrix printers of the 1980s, the home or office user can now access high resolution printing that was previously only available through professional printing firms for just a few hundred pounds. However, the Ink and toner for Epson printers will greatly affect the final print quality, so it pays to choose wisely.
INK FOR EPSON PRINTERS
Inkjet printers can be vulnerable to changes in the ink, and Epson printers are no exception to this. Problems with the ink can lead to banding, where a series of light or dark bands run across areas of solid colour. Bleeding can also occur, where the ink leaks across the image as if it were printed on blotting paper. Official inks are more expensive than refills, and will produce good results, but refills and third party ink suppliers are getting better all the time, so it can pay to experiment with cheaper inks, which are widely available.
TONER FOR EPSON PRINTERS
Laser printers can also be filled with either original toner from Epson, or third party toner. A common problem with toner is light areas on the page, either in patches or across the whole page; this can be cured by removing and shaking the toner cartridge, to redistribute the toner throughout the cartridge. When performing this fix, some toner is likely to spill from the open end of the cartridge, so it is best to shake the cartridge over newspaper or some kind of protective covering. Remember that toner is designed to set when it is exposed to heat, so if you get any toner in places it shouldn’t be, wash it off with cold water only, never with hot water. Another common issue with toner is seeing spots on the page. This can be caused by a leaking toner cartridge that is dropping toner onto the page, or by a faulty fuser which is not heating the toner sufficiently to bind it to the page.
CONCLUSION: TEST AND VERIFY
If you are looking to buy Ink and toner for Epson printers, the best advice is to experiment with a remanufactured or third party refill to see if it meets your needs. It is unlikely to damage your printer, and could save you a great deal of money.
This Image: vloenerjung – Fotolia